Midori double-sided bedside table

Midori double-sided bedside table that can also be placed in the center of the bedroom thanks to the finish on all 4 sides.

Bedside table available in various sizes with which, by adding more elements of the same or different sizes, it is possible to compose various solutions to build your own chest of drawers, bedside table or bedroom furniture. In these compositions with several overlapping bedside tables you can "play" with the opening of the drawers orienting them in various directions.

Bedside table size 1 drawer H. 20 cm and H. 28 cm:

• L. 45 P. 45 and P. 53.7 cm
• L. 53.7 P. 45 and P. 53.7 cm
• L. 60 P. 45 and P. 53.7 cm
• L. 90 P. 45 and P. 53.7 cm

Bedside table 2 drawer measures H. 20 cm and H. 28 cm:

• L. 120 P. 45 and P. 53.7 cm
• L. 150 P. 45 and P. 53.7 cm
• L. 180 P. 45 and P. 53.7 cm

Bedside table 4 drawer measures H. 20 cm and H. 28 cm:

• L. 240 P. 45 and P. 53.7 cm

Bedside table with three opening modes: the protruding edge of the first drawer can be extracted, the Mini plate inserted in correspondence with the opening of the opening can be used, or the Midori handle can be used protruding from the drawer limit.

The single standard bedside tables are supplied without a handle as the opening of the drawer is carried out by extracting the protruding edge.
For the solutions with more overlapping bedside tables, the elements of the same size placed under other elements are equipped with the standard Mini plate. Alternatively the drawers of these bedside tables can be opened using the Midori handle.
Finally, the overlapping elements divided by the theca do not include handles and the drawers open through the protruding edge.

Modern bedside table with the possibility of having the structure of a different color than the lowered top (or tray) and the base on the ground, so as to have an original design also given by the contrast of colors.

In the lowered top, an additional glass top can be inserted for a more elegant effect or a theca with a lid to complete the bedside table or a theca separator to be inserted between two overlapping elements.

To order a solution with several different bedside tables, you must place the order of the item several times by choosing the options you want.

External perimeter:

composed of fronts, sides and backrest, made with class E1 particle board panels with low formaldehyde content 20 mm thick. Characterized by a 45 ° beveled edge between sides and fronts and also between back and sides.

Top and plinth:

made with class E1 particle board panels with low formaldehyde content 20 mm thick for the top and 50 mm thick for the plinth.

Theca:

made from 10 mm thick glued transparent glass elements.

Drawers:

they include BLUMOTION high sliding guides with end-of-stroke block and cushioned retraction mechanism as standard. 3 sides sides covered in 14 mm thick PVC and bottom in 8 mm thick melamine with synthetic covering in jute textured finish.

feet:

for ground plinth made of black plastic: in the version with stacked plinth it is replaced by a special high-friction film.