Picot sideboard

Structure:

made with particle board panels (compliant with E1 - TSCA - CARB - UBA standards) thickness of 20 mm for the sides, bottoms, lids or 40 mm for partitions and internal dividers. They are covered with synthetic facing also matt lacquered, glossy and metal or with varnished wood veneer. The internal shelves are in transparent tempered glass with a thickness of 6 mm. The support surfaces inside the furniture are intended to contain the light materials used in homes (equal to 25 kg per square metre) evenly distributed. For more concentrated weight loads it is recommended to use single elements 450 - 600 mm wide. Backs in particle board panels (compliant with E1 - TSCA - CARB - UBA standards) of medium density 4 mm thick with synthetic facing also matt lacquered or metal. The glossy shell of elements with doors means the outside of the sides and relative perimeter edges. The inside and the backs are supplied with the corresponding matt lacquered colour, while for elements with a drawer the inside is always Juta textured. The base and wall units prof. 546 and 450 with compartment L 900 are equipped with a support rod that prevents warping.

Front:

made with particle board panels (complying with E1 - TSCA - CARB - UBA standards) 20/35 mm thick covered with synthetic facing also matt or glossy lacquered and metal or with painted wood veneer. By glossy front we mean the exterior and relative glossy edges, while the interior is supplied with the corresponding matt lacquered colour.

Top:

made with 15 mm thick wood particle board panels (compliant with E1 - TSCA - CARB - UBA standards) covered with synthetic facing, also matt or glossy lacquered and metal or with varnished wood veneer. By glossy top and lid we mean the exterior and relative glossy edges. The protruding squares are instead finished with a glossy finish also on the internal side.

Hinges and sideburns:

made of nickel-plated metal with 90° opening for wooden hinged doors th. 20, equipped with horizontal, vertical and depth adjustment. The hinges are certified C.A.T.A.S. with durability tests up to 80,000 openings (UNI 10715/99, par 10.4).

Drawer runners:

Push-pull opening: High sliding metal runners with full extension, limit switch block and dynamic capacity of 30 kg. Sliding synchronizer integrated in the drawer guides with width greater than 450. Anti-release pin and vertical and inclination adjustment of the fronts integrated in all the guides of the system. Drawers 1200 and 1500 wide with "Movento" guides and lateral adjustment of the fronts.

Drawer:

14 mm thick and 8 mm thick bottom in particle board panels (compliant with E1 - TSCA - CARB - UBA standards) with jute textured facing.