Fris wardrobe

shell:

made of chipboard (weight 620 Kg per mc in class E1 with low formaldehyde emission, reaction to fire class 2 according to ISO standards) covered with decorative paper in white finish BL impregnated with melamine resins with a thickness of 18 mm for the sides, partition , cover and bottom, 12 mm for the back and 25 mm for the internal movable shelves in melamine or in epoxy powder painted sheet metal, suitable to support suspended folders with a center distance of 33 cm. The sides are arranged inside them with double holes with a 32 mm pitch suitable for receiving the shelves. Except for the raised version, all the furniture is equipped with a stabilizing bottom which has the function of distributing the weight for a better sliding of the doors. The leveling feet in black abs are applied to the stabilizer bottom and are adjustable from inside the cabinet. The quick assembly of the shell is carried out dry by means of suitable metal hardware treated with anti-corrosion. For the 46 cm depth body, wall positioning is recommended, while the choice of the 48 cm depth body allows you to position the wardrobe in the center of the room with the mandatory addition of the finishing back.

Melamine doors:

made of 18 mm thick melamine chipboard. They are edged along the perimeter sides with rounded ABS edge having a thickness of 1 mm, radius 2 mm; the lower and upper carriages slide on aluminum rails positioned on the bottom and on the cover. They are equipped with dust protection profiles and retarders both when closing and opening the door. The doors H. 160 cm and 200 cm have inside the tie rods to straighten the doors to prevent them from getting stuck. The lock is Yale type flat cylinder with a folding key handle.

Finishing back:

made of 18 mm melamine and bordered on the perimeter with 1 mm thick ABS edge with 2 mm radius or covered in fabric. The backs of the 160x160 cm and 160x200 cm wardrobes are made up of a pair of panels.