Block 2.0 presidential desk

Leg:

made with panels with a thickness of 18/19 mm, depending on the finish, worked in folding to obtain an edge thickness of 88 mm. During assembly, two metal legs formed by tubular steel 40x40x2 mm and 60x15x1.5 mm painted with high-strength black epoxy powders are housed inside the folding body to ensure maximum solidity and stability to the structure. The metal legs are equipped with high-capacity ABS leveling feet. In the inner part of the leg d.1000 mm there is a panel in the same color as the structure, removable by means of a pressure clip, which allows the rapid channeling of the leg. The leg can be fitted with a retractable wireless charger (optional) or a cable gland (optional) positioned in the center of the leg. The lower part is closed by a removable panel with a pressure clip. The panel is in the same color as the ME structure, white or black in the other variants. On the side, in conjunction with the desk top, the leg is equipped with a decorative plate in 5 mm thick brushed oxidized brass aluminum (not included in the Block Easy 2.0 version).

Reduced leg on sliding unit:

made with panels with a thickness of 18/19 mm, depending on the finish, worked in folding to obtain an edge thickness of 88 mm. During assembly, two metal legs formed by tubular steel 40x40x2 mm and 60x15x1.5 mm painted with high-strength black epoxy powders are housed inside the folding shell to ensure maximum solidity and stability to the structure. The metal legs are equipped with a high grip non-slip gasket to ensure solidity with the underlying structure. The leg can be fitted with a retractable wireless charger (optional) or a cable gland (optional) positioned in the center of the leg. The lower part of the top is closed by a removable panel with a pressure clip in the same color as the ME structure, white or black in the other variants. The lower panel is equipped with a round plastic cable gland to facilitate the channeling of the leg. On the side, in conjunction with the desk top, the leg is equipped with a decorative plate in 5 mm thick brushed oxidized brass aluminum (not included in the Block Easy 2.0 version).

Slide desk top:

made with panels with a thickness of 18/19 mm, depending on the finish, worked in folding to obtain an edge thickness of 88 mm. The top is supported by a metal beam made of steel tubing 60x15x1.5 mm and 50x50x2 mm painted with high resistance epoxy powders in black color to ensure maximum solidity and stability. The beam is equipped with quick couplings for connection to the side legs. The top is divided into two, a fixed one matching the legs and a sliding one positioned on high-capacity ball guides, with the possibility of choosing different finishes from the structure. The sliding top leads to the lower channeling tank made of 1 mm thick folded steel painted with high-strength epoxy powders in black color that allows the housing of multiple sockets, or use as an additional compartment. The bottom is equipped with a black leather mat. The lower part is closed by a removable panel with a pressure clip in the same color as the ME structure, white or black in the other variants. In the junction between the fixed top and the sliding top, the structure is equipped with two 5 mm thick aluminum plates and a 10 mm thick brushed oxidized brass aluminum tube that allows easy passage of the desk top cables.

Skirts:

made with 18/19 mm thick panels, depending on the finish, and supported by 3 mm thick bent steel brackets painted with high resistance black epoxy powders connected by screws to the desk top beam.

Sliding unit:

made with panels with a thickness of 18/19 and 27/28/29 mm, depending on the finish. The structure is equipped with sliding tracks in anodized aluminum in chemical 0 finish for the sliding of the doors and high-capacity ABS leveling feet. The structure is designed with two technical compartments for the channeling of the same. In the upper part there is a PROFCABLE 300x150 mm cable gland and in the lower part 3 round cable glands that allow the cables to pass through. It is possible to wire the module in a semi-hidden way through a cable gland (optional) in molded plastic in the colors white, gray and black. The doors are equipped with a high capacity and high sliding mechanism with adjustment, quick assembly system, cushioning system in opening / closing and lock with double swivel key in ABS respecting the safety regulations on the places. ghee about work and privacy. Inside there is a chest of drawers in the same finish as the structure. The internal drawers are made of steel sheet painted with high resistance epoxy powders on high-capacity, high-sliding fully extractable ball guides with stop control plus amortized self-inside system. The stationery tray supplied as standard is made of black plastic. In the upper part there is an aluminum cable gland 300x150 mm, and in the lower part 3 round cable glands that allow the cables to pass. Through a series of cable glands (optional) it is possible to wire in a semi-hidden way from the technical compartment to the desk leg.

Exploded desk on slidinng unit:

• 1. Desk top 88 mm thick
• 2. Skirt with stirrups 18/19 mm thick
• 3. 88 mm thick ductable leg
• 4. Beam desk
• 5. Leg on sliding unit thickness 88 mm
• 6. Sliding unit top thickness 27/28/29 mm
• 7. Sliding unit bottom thickness 27/28/29 mm
• 8. Internal chest of drawers with 3 drawers
• 9. Sliding door thickness 18/19 mm
• 10. Grommet