Diamante is a table for living area and kitchen, with slender and slender lines, available in various sizes, both in fixed and extendable configuration, to add places in case of need, with a lift from a minimum of 6 to a maximum of 10 people depending on the model.
The frame is made of extruded aluminum with die-cast legs, painted with unalterable epoxy powders. Both the top and the extensions are made of veneered bevel, or optionally, in Cleaf and Fenix ennobled panels. In particular, the glass and ceramic version is obtained with the "Glue Point" system, with a gluing of a 6mm top of noble material on a 12mm subpanel, with a very high response to the CATAS impact test, guaranteeing maximum safety for the standard.
The minimal design of the table aims at a wide-ranging solution, with extremely reduced lines in the face of versatility of use. The elegant choice of the edge-shaped structures for the legs lightens the image of the table, allowing it to be inserted in already well-defined contexts without distorting them, but integrating them. The availability of different versions for dimensions and extensibility, then, does not oblige a forced choice, directed towards a model with different perspectives of use than those imagined.
Fixed or extendable modern table sizes:
Advantages:✔ Elegant and slender table
made from an extruded aluminum frame and legs in die-cast aluminum painted with epoxy powders.
Plan and stretch:
made in bevelled veneer or in decorative Cleaf and fenix. In the ceramic and glass version it comes by adopting the "Glue Point" system, which consists of gluing a 6 mm ceramic or glass top onto a 12 mm subpanel. The "Glue Point" tops respond to the CATAS "EN 1730: 2000 impact on the top" test, offering the advantage of maximum safety in the event of breakage, thanks to the top glued to the glass.