Simon table

Plan:

made of chipboard covered with decorative paper impregnated with resins according to EN standards, anti-reflective finish (density 620Kg / mc. class E1 with low formaldehyde emission according to ISO standards, reaction to fire class 2), with 25 mm thick panels edged with rounded 2mm solid ABS.

Fixed legs:

The foot is made by means of a cold pressed 2.5 mm thick sheet metal and equipped with a 2 mm thick lower reinforcement to increase stability, equipped with adjustable levelers. The upright has a section of 70x70 2 mm thick. The upright fixed to the foot with M10 screws can be central or offset by 140 mm. The upper flange is 3 mm thick joined to the column by means of joints made from molded glass-filled ABS. The height of the legs is 715 mm below the floor. The legs are painted with epoxy powders.

Height adjustable legs:

The foot is made by means of a cold pressed 2.5 mm thick sheet metal and equipped with a 2 mm thick lower reinforcement to increase stability, equipped with adjustable levelers. The upright has a section of 70x70 2 mm thick and an internal section of 60x60 2 mm thick. The upright fixed to the foot with M10 screws can be central or offset by 140 mm. The upper flange is 3 mm thick joined to the column by means of joints made from molded glass-filled ABS. The height of the legs is adjustable from 625 to 825 mm, 20 mm step and the adjustment is made by means of an abs button located on the inside of the upright. The legs are painted with epoxy powders.